2008 Yamaha Snowmobiles FX NYTRO Factory Service Manual, Page 248Get this manual

2008 Yamaha Snowmobiles FX NYTRO Factory Service Manual, Page 248

CONNECTING RODS AND PISTONS Measurement steps: CAUTION: Do not interchange the big end bearings and connecting rodsTo obtain
on the big end bearings with the notches in the connecting rod and connecting rod cap Put piece of Plastigauge on the crankshaft
pin Assemble the connecting rod halves Do not move the connecting rod or crankshaft until the clearance measurement has been
completed Apply molybdenum disulfide grease onto the bolts, threads, and nut seats Make sure that the "Y" mark on the connecting