2008 Yamaha Snowmobiles FX NYTRO Factory Service Manual, Page 391Get this manual

2008 Yamaha Snowmobiles FX NYTRO Factory Service Manual, Page 391

CABLE ROUTING 1 To the auxiliary DC jack (FX10MTFX10MTR FX10MTRA) Throttle cable Radiator fan motor coupler Wire harness
off the excess end of the tieD Face the ends of the hose clamp rearwardE Install the fuel tank breather hose completely onto
the hose joint, making sure that the end of the hose contacts the frameF Fasten the corrugated tube of the speed sensor lead
with the holdersG Speed sensor Water pump inlet hose Fasten the wire harness, at the portion just before the leads split,
to the frame rear cross member with the plastic bandJ Water pump outlet hose (to oil cooler) Throttle body outlet hose Water
pump outlet hose (to water jacket) Fasten the wire harness, oil pressure switch sub-lead, and crankshaft position sensor