2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 15Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 15

IMPORTANT INFORMATION GEN INFO GASKETS, OIL SEALS, AND O-RINGS 1All gaskets, seals, and O-rings should be replaced when an
outwards(In other words, the stamped letters must be on the side exposed to view When installing oil seals, apply light coating
of lightweight lithium base grease to the seal lipsOil the bearings liberally when installing Do not use compressed air to
spin the bearings dryThis causes damage to the surface of the bearings CIRCLIPS All circlips should be inspected carefully
before reassemblyAlways replace piston pin clips after one useReplace misshapen circlipsWhen installing circlipmake sure
that the sharp edged corner is positioned opposite to the thrust it receivesSee the sectional viewShaft LOCTITE After installing