2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 38Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 38

VALVE CLEARANCE ADJUSTMENT INSP ADJ and the valve Install the new valve pad lifter TIP Apply molybdenum-disulfide oil to
journals and camshaft cap bolts Align the camshaft marks with the camshaft cap marks Rotate the crankshaft clockwise several
turns to seat the parts Measure the valve clearance again If the valve clearance is still out of specification, repeat all
of the valve clearance adjustment steps until the specified clearance is obtained8Install: Crankshaft end accessing screw
Timing mark accessing screw 9Install: Cylinder head cover Refer to "CAMSHAFTS" in CHAPTER 510.Install: All removed parts