2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 56Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 56

DRIVE V-BELT DRIVE V-BELT INSP ADJ WARNING When installing the new V-belt, make sure that it is positioned from 1.5 mm (0.06
by removing or adding shim on each adjusting bolt As the V-belt wears, adjustment may be necessaryTo ensure proper clutch
performance, the V-belt position should be adjusted by adding shim on each adjusting bolt when the V-belt position reaches
1.5 mm (0.06 in) below the edge New belt width: 34.234.8 mm (1.351.37 in) Belt wear limit width: 32.5 mm (1.28 in) 1Measure: