2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 71Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 71

STEERING SYSTEM INSP ADJ Toe-out adjustment 1Place the snowmobile on level surface2Measure: Ski toe-out) Ski stance Point
to "STEERING" in CHAPTER Loosen the locknuts (tie-rods) Turn the tie rods in or out until the specified toe-out is obtained
Tighten the locknuts (tie-rods) Tie-rod end locknut: 25 Nm (2.5 mkgf, 18 ftlbf) LOCTITE After tightening the inside and outside
ball joint locknutsmake sure the tie rods can be rotated freely through the ball joint travelIf not, loosen the locknuts