2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 76Get this manual
HEADLIGHT BEAM ADJUSTMENT INSP ADJ HEADLIGHT BEAM ADJUSTMENT 1Place the snowmobile on level surface2Place the snowmobile
the engine and let it idle5Switch on the headlight's high beam and check the height of the projected beam on the wallThe
projection should be at the position marked in step or 12 lower (set range )3.0 (10 ft) 26 mm (1.0 in) : DistanceHeight 7.6
(25 ft) 66 mm (2.6 in) : Set range 6Adjust: Headlight beam (vertically) Adjustment steps: Remove the top coverRefer to "COWLINGS"