2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 81Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 81

BATTERY INSPECTION Charging method using variable voltage charger Charger AMP meter INSP ADJ Measure the open-circuit voltage
to check if the standard charging current is reachedNO If the current does not exceed the standard charging current after
minutes, replace the battery Adjust the voltage so that the current is at the standard charging level Set the time according
to the charging time suitable for the open-circuit voltageRefer to "BATTERY INSPECTION" If charging requires more than hours,
it is advisable to check the charging current after lapse of hoursIf there is any change in the amperage, readjust the voltage
to obtain the standard charging current Measure the battery open-circuit voltage after leaving the battery unused for more