2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 131Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 131

STEERING Tie rod end locknut: 25 Nm (2.5 mkgf, 18 ftlbf) LOCTITE Tie rod-idler arm nut: 30 Nm (3.0 mkgf, 22 ftlbf) Tie rod-steering
length 227.8 mm (8.97 in) Shaft length 169.8 mm (6.69 in) TIP Install the pink-colored end of the joint to the steering column
Install the "D" measure side of the steering shaft to the steering column 165 mm (2.56 in) 50 mm (1.97 in) Always use new