2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 255Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 255

CYLINDER HEAD INSTALLATION 1Install: Dowel pins Cylinder head gasket Cylinder head TIP Pass the timing chain through the
bolts thread and both sides of the washers Install the cylinder head bolts Tighten the cylinder head bolts in the proper
tightening sequence as shownCylinder head bolt (M10): 1st: 25 Nm (2.5 mkgf, 18 ftlbf) Loosen all the cylinder head bolts
one by one in the proper tightening sequence as shown and then tighten them againCylinder head bolt (M10): 2nd: 25 Nm (2.5