2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 296Get this manual

2010-2011 Yamaha RS Vector / RS Venture Service Manual, Page 296

CONNECTING RODS AND PISTONS Measurement steps: Do not interchange the big end bearings and connecting rodsTo obtain the correct
big end bearings with the notches in the connecting rod and connecting rod cap Put piece of Plastigauge on the crankshaft
pin Assemble the connecting rod halvesTIP Do not move the connecting rod or crankshaft until the clearance measurement has
been completed Apply molybdenum disulfide oil onto the bolt, threads, seats and nut seats Make sure that the "Y" mark on
the connecting rod faces towards the right side (AC magneto rotor side) of the crankshaft Make sure that the characters on